4. From `raw_data` to `norm_data`

To access the workflow of TSAR, user can input raw fluorescent readings through built in functions from utils: read.delim() or read.csv(). Built in data imports from RStudio UI is also appropriate, given raw_data only needs to be saved as dataframe structure. Wrapping input in data.frame() will also ensure correct data type. Use head() and tail() to ensure excessive information is removed, i.e. blank lines, duplicate titles, etc.

data("qPCR_data1")
raw_data <- qPCR_data1
head(raw_data)
tail(raw_data)

4.1 Data Preprocessing

From raw data to ready-for-analysis data, there are few functions to assist the selection and normalization of data.

Functions screen() and remove_raw() helps screen and remove data of selection. This save time and space by remove unwanted data such as blank wells and corrupted curves. Aside from data param input, both functions share similar parameters of checkrange, checklist or removerange, removelist.

checkrange, removerange : a range of wells, e.g. wells from A01 to B08 is c("A","B","1","8")
checklist, removelist: a list of wells, e.g. c("A01","C03")

If no wells are specified, screen() will default to screening every well and reomve_raw() will default to not removing an well.

screen(raw_data) + theme(
    aspect.ratio = 0.7,
    legend.position = "bottom",
    legend.text = element_text(size = 4),
    legend.key.size = unit(0.1, "cm"),
    legend.title = element_text(size = 6)
) +
    guides(color = guide_legend(nrow = 4, byrow = TRUE))

raw_data <- remove_raw(raw_data, removerange = c("C", "H", "1", "12"))

Both functions above are wrapped inside an interactive window through function weed_raw(). It is implemented through R Shiny application where users can select curves using cursor and remove selected curves easily. Refer to separate vignette, "TSAR Workflow by Shiny", and README.md file for more documentation.

runApp(weed_raw(raw_data))

Running the window, we can spot that the curve at A12 has an abnormally high initial fluorescence and should be removed for data accuracy. We can make sure of correct selection through the View Selected button and remove it using the Remove Data button. Note that all data edits are made inside the interactive window. To translate the change globally for downstream analysis, simply click Save to Rand close window to store data into the global environment. Alternatively, click Copy Selected and paste information to remove_raw(). To avoid error, close window proper through Close Window instead of the cross mark on top left corner.

raw_data <- remove_raw(raw_data,
    removelist =
        c(
            "B04", "B11", "B09", "B05", "B10", "B03",
            "B02", "B01", "B08", "B12", "B07", "B06"
        )
)

4.2 Data Analysis

Normalizing data is prompted through normalize(). Although individual calls are not necessary as they are wrapped together in gam_analysis(), if viewing the validity of model is desired, one can prompt analysis of one well.

TSAR package performs derivative analysis using a generalized additive model through package mgcv or boltzmann analysis using nlsLM from package minpack.lm.

4.2.1 Individual Well Application

For analysis of an idividual well, refer to these following functions:

normalize()
model_gam()
model_fit()
view_model()
Tm_est()

test <- filter(raw_data, raw_data$Well.Position == "A01")
test <- normalize(test)
gammodel <- model_gam(test, x = test$Temperature, y = test$Normalized)
test <- model_fit(test, model = gammodel)
view <- view_model(test)
view[[1]] + theme(aspect.ratio = 0.7, legend.position = "bottom")

view[[2]] + theme(aspect.ratio = 0.7, legend.position = "bottom")

Tm_est(test)

#> [1] 53.73642

View model generates a list of two graphs, showing fit of modeling on fluorescence data and the derivative calculation of such data.

4.2.2 96-Well Plate Application

All analysis necessary are formatted in function gam_analysis(). Parameters are inherited from functions noted in section “Individual Well Application”. Hence, if any errors are prompted, check through individual well application for correct parameter input and other potential errors.

smoothed inherited from model_fit()
fluo and selections inherited from normalize()

x <- gam_analysis(raw_data,
    smoothed = TRUE,
    fluo_col = 5,
    selections = c(
        "Well.Position", "Temperature",
        "Fluorescence", "Normalized"
    )
)

4.3 Data Summary

Data summary offers an exit point from the workflow if no further graphic outputs are required. Output is allowed in three formats: - output_content = 0, only Tm values by well - output_content = 1, all data analysis by each temperature reading. If previously called smoothed = T, analysis will not run gam modeling, thus will not have fitted data. - output_content = 2, combination of the above two data set.

To associate ligand and protein conditions with each individual well, call the function join_well_info(). One may specify using the template excel or separate csv file containing a table of three variables, “Well”, “Protein”, and “Ligand”.

data("well_information")
output <- join_well_info(
    file_path = NULL, file = well_information,
    read_tsar(x, output_content = 0), type = "by_template"
)

Write output using command write_tsar write_tsar(output, name = "vitamin_analysis", file = "csv")

To streamline to the following graphic analysis, make sure output_content = 2 to maintain all necessary data.

norm_data <- join_well_info(
    file_path = NULL, file = well_information,
    read_tsar(x, output_content = 2), type = "by_template"
)

All of the function above in section 2 are wrapped together in a shiny application named analyze_norm(). Refer to separate vignette, "TSAR Workflow by Shiny", and README.md file for more documentation.

runApp(analyze_norm(raw_data))

5. From `norm_data` to `tsar_data`

norm_data contains normalized fluorescent data on a scale of 0 to 1 based on the maximum and minimum fluorescence reading. norm_data also contains a first derivative column. tsar_data is the final format of project data encapsulating all replication. Therefore, it contains all condition data including experiment date and analysis file source.

5.1 Merge Replicates

Use merge_norm() to merge all norm_data and specify original data file name and experiment date for latter tracking purposes.

# analyze replicate data
data("qPCR_data2")
raw_data_rep <- qPCR_data2
raw_data_rep <- remove_raw(raw_data_rep,
    removerange = c("B", "H", "1", "12"),
    removelist = c("A12")
)
analysis_rep <- gam_analysis(raw_data_rep, smoothed = TRUE)
norm_data_rep <- join_well_info(
    file_path = NULL, file = well_information,
    read_tsar(analysis_rep, output_content = 2),
    type = "by_template"
)

# merge data
tsar_data <- merge_norm(
    data = list(norm_data, norm_data_rep),
    name = c(
        "Vitamin_RawData_Thermal Shift_02_162.eds.csv",
        "Vitamin_RawData_Thermal Shift_02_168.eds.csv"
    ),
    date = c("20230203", "20230209")
)

5.1.1 Jumpstart to Graph

If outputted data from qPCR already contains analysis and data necessary, enter TSAR workflow from here, using functions merge_TSA(), read_raw_data(), read_analysis().

#analysis_file <- read_analysis(analysis_file_path)
#raw_data <- read_raw_data(raw_data_path)
#merge_TSA(analysis_file, raw_data)

After merging, use assisting functions to check and trace data. Use these two functions to guide graphics analysis for error identification, selective graphing and graph comparisons.

condition_IDs() list all conditions in data
well_IDs() list all IDs of individual well
TSA_proteins() list all distinct proteins
TSA_ligands() list all distinct ligands
TSA_Tms() list all Tm estimations by condition
Tm_difference() list all delta Tm estimations by control condition

condition_IDs(tsar_data)

#> [1] "CA FL_DMSO"       "CA FL_CAI"        "CA FL_BIOTIN"     "CA FL_4-ABA"     
#> [5] "CA FL_=+-LA"      "CA FL_PyxINE HCl"

well_IDs(tsar_data)

#>  [1] "A01_CA FL_DMSO_20230203"       "A02_CA FL_DMSO_20230203"      
#>  [3] "A03_CA FL_CAI_20230203"        "A04_CA FL_CAI_20230203"       
#>  [5] "A05_CA FL_BIOTIN_20230203"     "A06_CA FL_BIOTIN_20230203"    
#>  [7] "A07_CA FL_4-ABA_20230203"      "A08_CA FL_4-ABA_20230203"     
#>  [9] "A09_CA FL_=+-LA_20230203"      "A10_CA FL_=+-LA_20230203"     
#> [11] "A11_CA FL_PyxINE HCl_20230203" "A12_CA FL_PyxINE HCl_20230203"
#> [13] "A01_CA FL_DMSO_20230209"       "A02_CA FL_DMSO_20230209"      
#> [15] "A03_CA FL_CAI_20230209"        "A04_CA FL_CAI_20230209"       
#> [17] "A05_CA FL_BIOTIN_20230209"     "A06_CA FL_BIOTIN_20230209"    
#> [19] "A07_CA FL_4-ABA_20230209"      "A08_CA FL_4-ABA_20230209"     
#> [21] "A09_CA FL_=+-LA_20230209"      "A10_CA FL_=+-LA_20230209"     
#> [23] "A11_CA FL_PyxINE HCl_20230209"

TSA_proteins(tsar_data)

#> [1] "CA FL"

TSA_ligands(tsar_data)

#> [1] "4-ABA"      "=+-LA"      "BIOTIN"     "CAI"        "DMSO"      
#> [6] "PyxINE HCl"

conclusion <- tsar_data %>%
    filter(condition_ID != "NA_NA") %>%
    filter(condition_ID != "CA FL_Riboflavin")

5.2 Graphic Analysis

5.2.1 Tm Boxplot

Use TSA_boxplot() to generate comparison boxplot graphs. Stylistics choices include coloring by protein or ligand, and legend separation. Function returns ggplot object, thus further stylistic changes are allowed.

TSA_boxplot(conclusion,
    color_by = "Protein",
    label_by = "Ligand", separate_legend = TRUE
)

#> [[1]]

#> 
#> [[2]]

5.2.2 TSA Curve Visualization

TSA_compare_plot() generates multiple line graphs for comparison. Specify Control condition by assigning condition_ID to control. Functions allows graphing by both: - raw fluorescent readings y = 'Fluorescence' - normalized readings y = 'RFU'.

control_ID <- "CA FL_DMSO"

TSA_compare_plot(conclusion,
    y = "RFU",
    control_condition = control_ID
)

#> $`CA FL_CAI`

#> 
#> $`CA FL_BIOTIN`

#> 
#> $`CA FL_4-ABA`

#> 
#> $`CA FL_=+-LA`

#> 
#> $`CA FL_PyxINE HCl`

#> 
#> $`Control: CA FL_DMSO`

5.2.3 Curves by Condition

Users may also graph by condition IDs or well IDs using function TSA_wells_plot().

ABA_Cond <- conclusion %>% filter(condition_ID == "CA FL_4-ABA")
TSA_wells_plot(ABA_Cond, separate_legend = TRUE)

#> [[1]]

#> 
#> [[2]]

5.2.4 First Derivative Comparison

To further visualization comparison, graph first derivatives grouped by needs. Note if modeling was set to boltzman fit, frist derivatives will be excessively smooth and contains no information beyond specified minimum and maximum. Below is an example command. Due to size limit of vignette, graph will not be displayed. view_deriv(conclusion, frame_by = "condition_ID")

All of the above functions are also wrapped in an interactive window call through graph_tsar(). Simply call function on merged tsar_data and access all graphing features in one window. Refer to separate vignette, "TSAR Workflow by Shiny", and readme.md file for more documentation.

runApp(graph_tsar(tsar_data))

6. Session Info

6.1 Citation

citation("TSAR")

#> To cite package 'TSAR' in publications use:
#> 
#>   Gao X, McFadden WM, Wen X, Emanuelli A, Lorson ZC, Zheng H, Kirby KA,
#>   Sarafianos SG (2023). "Use of TSAR, Thermal Shift Analysis in R, to
#>   identify Folic Acid as a Molecule that Interacts with HIV-1 Capsid."
#>   _bioRxiv_. doi:10.1101/2023.11.29.569293
#>   <https://doi.org/10.1101/2023.11.29.569293>.
#> 
#> A BibTeX entry for LaTeX users is
#> 
#>   @Article{,
#>     title = {Use of TSAR, Thermal Shift Analysis in R, to identify Folic Acid
#>             as a Molecule that Interacts with HIV-1 Capsid},
#>     author = {X. Gao and W. M. McFadden and X. Wen and A. Emanuelli and Z. C. Lorson and H. Zheng and K. A. Kirby and S. G. Sarafianos},
#>     journal = {bioRxiv},
#>     year = {2023},
#>     doi = {10.1101/2023.11.29.569293},
#>   }

citation()

#> To cite R in publications use:
#> 
#>   R Core Team (2024). _R: A Language and Environment for Statistical
#>   Computing_. R Foundation for Statistical Computing, Vienna, Austria.
#>   <https://www.R-project.org/>.
#> 
#> A BibTeX entry for LaTeX users is
#> 
#>   @Manual{,
#>     title = {R: A Language and Environment for Statistical Computing},
#>     author = {{R Core Team}},
#>     organization = {R Foundation for Statistical Computing},
#>     address = {Vienna, Austria},
#>     year = {2024},
#>     url = {https://www.R-project.org/},
#>   }
#> 
#> We have invested a lot of time and effort in creating R, please cite it
#> when using it for data analysis. See also 'citation("pkgname")' for
#> citing R packages.

citation("dplyr")

#> To cite package 'dplyr' in publications use:
#> 
#>   Wickham H, François R, Henry L, Müller K, Vaughan D (2023). _dplyr: A
#>   Grammar of Data Manipulation_. R package version 1.1.4,
#>   <https://CRAN.R-project.org/package=dplyr>.
#> 
#> A BibTeX entry for LaTeX users is
#> 
#>   @Manual{,
#>     title = {dplyr: A Grammar of Data Manipulation},
#>     author = {Hadley Wickham and Romain François and Lionel Henry and Kirill Müller and Davis Vaughan},
#>     year = {2023},
#>     note = {R package version 1.1.4},
#>     url = {https://CRAN.R-project.org/package=dplyr},
#>   }

citation("ggplot2")

#> To cite ggplot2 in publications, please use
#> 
#>   H. Wickham. ggplot2: Elegant Graphics for Data Analysis.
#>   Springer-Verlag New York, 2016.
#> 
#> A BibTeX entry for LaTeX users is
#> 
#>   @Book{,
#>     author = {Hadley Wickham},
#>     title = {ggplot2: Elegant Graphics for Data Analysis},
#>     publisher = {Springer-Verlag New York},
#>     year = {2016},
#>     isbn = {978-3-319-24277-4},
#>     url = {https://ggplot2.tidyverse.org},
#>   }

citation("shiny")

#> To cite package 'shiny' in publications use:
#> 
#>   Chang W, Cheng J, Allaire J, Sievert C, Schloerke B, Xie Y, Allen J,
#>   McPherson J, Dipert A, Borges B (2024). _shiny: Web Application
#>   Framework for R_. R package version 1.9.1,
#>   <https://CRAN.R-project.org/package=shiny>.
#> 
#> A BibTeX entry for LaTeX users is
#> 
#>   @Manual{,
#>     title = {shiny: Web Application Framework for R},
#>     author = {Winston Chang and Joe Cheng and JJ Allaire and Carson Sievert and Barret Schloerke and Yihui Xie and Jeff Allen and Jonathan McPherson and Alan Dipert and Barbara Borges},
#>     year = {2024},
#>     note = {R package version 1.9.1},
#>     url = {https://CRAN.R-project.org/package=shiny},
#>   }

citation("utils")

#> The 'utils' package is part of R.  To cite R in publications use:
#> 
#>   R Core Team (2024). _R: A Language and Environment for Statistical
#>   Computing_. R Foundation for Statistical Computing, Vienna, Austria.
#>   <https://www.R-project.org/>.
#> 
#> A BibTeX entry for LaTeX users is
#> 
#>   @Manual{,
#>     title = {R: A Language and Environment for Statistical Computing},
#>     author = {{R Core Team}},
#>     organization = {R Foundation for Statistical Computing},
#>     address = {Vienna, Austria},
#>     year = {2024},
#>     url = {https://www.R-project.org/},
#>   }
#> 
#> We have invested a lot of time and effort in creating R, please cite it
#> when using it for data analysis. See also 'citation("pkgname")' for
#> citing R packages.

6.2 Session Info

sessionInfo()

#> R version 4.4.1 (2024-06-14)
#> Platform: x86_64-pc-linux-gnu
#> Running under: Ubuntu 24.04.1 LTS
#> 
#> Matrix products: default
#> BLAS:   /home/biocbuild/bbs-3.20-bioc/R/lib/libRblas.so 
#> LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.12.0
#> 
#> locale:
#>  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
#>  [3] LC_TIME=en_GB              LC_COLLATE=C              
#>  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
#>  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
#>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
#> 
#> time zone: America/New_York
#> tzcode source: system (glibc)
#> 
#> attached base packages:
#> [1] stats     graphics  grDevices utils     datasets  methods   base     
#> 
#> other attached packages:
#> [1] shiny_1.9.1   ggplot2_3.5.1 dplyr_1.1.4   TSAR_1.4.0   
#> 
#> loaded via a namespace (and not attached):
#>  [1] gtable_0.3.6        xfun_0.48           bslib_0.8.0        
#>  [4] shinyjs_2.1.0       htmlwidgets_1.6.4   rstatix_0.7.2      
#>  [7] lattice_0.22-6      vctrs_0.6.5         tools_4.4.1        
#> [10] generics_0.1.3      tibble_3.2.1        fansi_1.0.6        
#> [13] highr_0.11          pkgconfig_2.0.3     Matrix_1.7-1       
#> [16] data.table_1.16.2   readxl_1.4.3        lifecycle_1.0.4    
#> [19] farver_2.1.2        stringr_1.5.1       compiler_4.4.1     
#> [22] munsell_0.5.1       minpack.lm_1.2-4    carData_3.0-5      
#> [25] httpuv_1.6.15       shinyWidgets_0.8.7  htmltools_0.5.8.1  
#> [28] sass_0.4.9          yaml_2.3.10         lazyeval_0.2.2     
#> [31] Formula_1.2-5       plotly_4.10.4       later_1.3.2        
#> [34] pillar_1.9.0        car_3.1-3           ggpubr_0.6.0       
#> [37] jquerylib_0.1.4     tidyr_1.3.1         cachem_1.1.0       
#> [40] abind_1.4-8         nlme_3.1-166        mime_0.12          
#> [43] tidyselect_1.2.1    zip_2.3.1           digest_0.6.37      
#> [46] stringi_1.8.4       purrr_1.0.2         labeling_0.4.3     
#> [49] splines_4.4.1       cowplot_1.1.3       fastmap_1.2.0      
#> [52] grid_4.4.1          colorspace_2.1-1    cli_3.6.3          
#> [55] magrittr_2.0.3      utf8_1.2.4          broom_1.0.7        
#> [58] withr_3.0.2         scales_1.3.0        promises_1.3.0     
#> [61] backports_1.5.0     rmarkdown_2.28      httr_1.4.7         
#> [64] cellranger_1.1.0    ggsignif_0.6.4      openxlsx_4.2.7.1   
#> [67] evaluate_1.0.1      knitr_1.48          viridisLite_0.4.2  
#> [70] mgcv_1.9-1          rlang_1.1.4         Rcpp_1.0.13        
#> [73] xtable_1.8-4        glue_1.8.0          rhandsontable_0.3.8
#> [76] jsonlite_1.8.9      R6_2.5.1

TSAR Package Structure

1. Introduction

2. Installation

3. Data Structure

4. From `raw_data` to `norm_data`

4.1 Data Preprocessing

4.2 Data Analysis

4.2.1 Individual Well Application

4.2.2 96-Well Plate Application

4.3 Data Summary

5. From `norm_data` to `tsar_data`

5.1 Merge Replicates

5.1.1 Jumpstart to Graph

5.2 Graphic Analysis

5.2.1 Tm Boxplot

5.2.2 TSA Curve Visualization

5.2.3 Curves by Condition

5.2.4 First Derivative Comparison

6. Session Info

6.1 Citation

6.2 Session Info

TSAR Package Structure

1. Introduction

2. Installation

3. Data Structure

4. From raw_data to norm_data

4.1 Data Preprocessing

4.2 Data Analysis

4.2.1 Individual Well Application

4.2.2 96-Well Plate Application

4.3 Data Summary

5. From norm_data to tsar_data

5.1 Merge Replicates

5.1.1 Jumpstart to Graph

5.2 Graphic Analysis

5.2.1 Tm Boxplot

5.2.2 TSA Curve Visualization

5.2.3 Curves by Condition

5.2.4 First Derivative Comparison

6. Session Info

6.1 Citation

6.2 Session Info

4. From `raw_data` to `norm_data`

5. From `norm_data` to `tsar_data`